NOTE
l
When removing the connector for the left
headlamp, do not forget to unhook the head-
lamp wiring from the wiring bracket (C).
3. Insert a straight blade (or minus) screwdriver
with a cloth over its tip at the edge of the
work hole cover (D) on the deck garnish (E)
and pry gently to remove the cover.
4. Loosen the fixing bolt (F) until the head of
the bolt touches the deck garnish (E).
NOTE
l
Do not loosen the bolt more than necessary.
Doing so could cause the bolt to fall off.
5. Insert a straight blade (or minus) screwdriver
to remove the 2 clips holding down the bump-
er.
Underside of bumper
6. Slowly lift up the bumper and disconnect the
joint between the bumper and fender.
Vehicle care and Maintenance
8-25
8
