switch is turned from the “LOCK” position
or the “ACC” position to the “ON” position.
3. When the vehicle is inspected at a
MITSUBISHI MOTORS Authorized Service
Point, the driving distance or number of
months remaining until the next inspection
will be shown.
NOTE
l
The indicated distance decreases in steps of
100 km (62 miles). The indicated number of
months decreases in steps of one month.
l
It is possible to change the settings for the
service reminder.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Author-
ized Service Point.
Resetting the service reminder
With the electric motor switch in the “LOCK” posi-
tion or the “ACC” position, it is possible to reset
the spanner mark (A) and “------” indication (B).
When they have been reset, the driving distance or
number of months remaining until the next inspec-
tion are shown and the spanner mark (A) is no lon-
ger shown every time the electric motor switch is
turned from the “LOCK” position or the “ACC” po-
sition to the “ON” position.
1. Push the reset button (D) to view the driving
distance or number of months remaining un-
til the next inspection.
2. Give the reset button (D) a long push (at
least two seconds) to make the spanner mark
(A) start flashing. (If you do not touch the re-
set button for 10 seconds while the spanner
mark is flashing, the display will revert to its
original indication.)
3. Give the reset button (D) a gentle push while
the spanner mark is flashing. The “------” in-
dication (B) will change to “cLEAr” (C).
4. The driving distance or number of months re-
maining until the next inspection will be
shown.
CAUTION
l
Daily and periodic inspections and main-
tenance are your responsibility. Be sure
to perform them to help prevent acci-
dents and breakdowns.
NOTE
l
It is not possible to reset the “------” indica-
tion (B) with the electric motor switch in the
“ON” position.
l
When a certain distance has been driven and
a certain period has elapsed after appearance
of the “------” indication (B), the indication is
automatically reset and the number of
months until the next periodic inspection is
shown.
l
If you accidentally reset the display, consult
a MITSUBISHI MOTORS Authorized Serv-
ice Point.
Instruments and controls
4-05
4
