l
If there is no operation for about 10 seconds
when the meter illumination control or serv-
ice reminder is shown, the display returns to
the odometer.
Odometer
E00530800016
The odometer indicates the total distance the vehi-
cle has travelled.
NOTE
l
Even if the electric motor switch is turned to
“ACC” or “LOCK”, the odometer will be dis-
played for about 30 seconds after the reset but-
ton is pressed.
Tripmeter
E00530900017
The tripmeter indicates the distance travelled dur-
ing a particular trip or period.
There are two tripmeter displays: Tripmeter
and
.
Tripmeter
can be used to measure the distance
travelled since the current trip began. At the same
time, Tripmeter
can be used to measure the dis-
tance from an intermediate location.
NOTE
l
Even if the electric motor switch is turned to
the “ACC” or “LOCK” position, the tripme-
ter will be displayed for about 30 seconds af-
ter the reset button is pressed.
To reset the tripmeter
To return the display to “0”, press the reset button
(A) for more than 2 seconds. Only the currently dis-
played value will be reset.
NOTE
l
If the auxiliary battery terminal is removed,
the memories for the tripmeter
and
displays are erased and the displays return to
0.
Service reminder
E00517700164
The service reminder shows the driving distance
(1) or number of months (2) remaining until the
next 12-monthly (20,000 km / 12,500 miles) inspec-
tion.
When the next inspection is nearly due, the display
shows “-----”.
At this time, a spanner mark (3) is shown for a few
seconds whenever the electric motor switch is
turned from the “LOCK” position or the “ACC” po-
sition to the “ON” position.
NOTE
l
Even if the electric motor switch is turned to
the “ACC” or “LOCK” position, the service
reminder will be displayed for about 30 sec-
onds after the reset button is pressed.
Driving distance
Number of months
1. The display shows the driving distance or
number of months remaining until the next in-
spection.
2. When the next inspection is nearly due, the
display shows “-----”.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Author-
ized Service Point.
At this time, a spanner mark is shown for a
few seconds whenever the electric motor
Instruments and controls
4-04
4
