Mitsubishi FX3U-ENET, User Manual

Page: 87 / 298

5 - 13 5 - 13
MELSEC-F
5 COMMUNICATION PROCEDURE
5.3 Router Relay Parameter
This section explains the router relay parameter.
Setting item name BFM number (Decimal) Description of setting Setting range/options
Router relay function
2
(b4, b5)
Select whether the router relay function is not used or is used.
00 : Use
01 : Not used
Sub-net mask pattern 512, 513 Set the sub-net mask. C0000000
H
to FFFFFFFC
H
Router IP address 514, 515 Set the IP address of the router to be routed through. Other than 00000000
H
and FFFFFFFF
H
NOTE
When making settings with the FX Configurator-EN (GX Developer), select [Router
Relay Parameters] from the initial screen and adjust the settings at the [Ethernet
Router Relay Parameter Settings] screen.
(1) Router relay function (BFM#2 b4,b5)
(a) Set whether the router relay function will be used or not.
The router relay function is not needed when the FX
3U
-ENET
communicates with the target device on the same Ethernet network (the
subnet address of the IP address is the same).
(b) The router relay function allows communication with devices on other
Ethernet networks via routers and gateways.
(The router relay function does not mean a function with which the FX
3U
-
ENET acts as a router.)
(c) One router can be set for the router relay function.