Mitsubishi FX3U-ENET, User Manual

Page: 208 / 298

10 - 9 10 - 9
MELSEC-F
10 USING THE E-MAIL FUNCTION
(2) E-mail settings
Set in order to use the e-mail function.
[Setting item]
Setting name
BFM number
(Decimal)
Description of setting item Setting range/option
Password 9913 to 9920
Set the password to the mail server (16 characters
or fewer)
—
Mail address 9856 to 9887
Set the mail address for the Ethernet module (64
characters or fewer)
—
Check of mail 9904 (b15)
Select whether or not to make inquiries to the
incoming mail server regarding received mail ON:Inquire
OFF: Do not inquire
General
setting
Time interval for inquiries 9904 (b14 to b0)
Set the time interval and unit for making inquiries
to the incoming mail server
Check unit designation (b12
to b14)
0: Hour, 1: Minute, 2: Second
Check interval (b11 to b0)
For hour : 1 to 24
For minute : 1 to 1440
For second : 30 to 3600
Specification
method
9921 Select send mail server specification method
0: Domain name specification
1: Decimal
2: Hexadecimal
Mail send
setting
STMP server
name / IP address
9922 to 9953
Set the IP address of send mail server or send
mail server name
00000001
H
to FFFFFFFE
H
Specification
method
9954 Select receive mail server specification method
0: Domain name specification
1: Decimal
2: Hexadecimal
Mail server
name
Mail
receive
setting POP server name
/ IP address
9955 to 9986
Set the IP address of the receive mail server or
receive mail server name
00000001
H
to FFFFFFFE
H
(a) General settings
Designate the mail setting values that have been registered with the Internet
service provider of the local station's Ethernet module or the mail registration
information designated by the system administrator.
1) Password:
Designate the mail password of the local station's Ethernet module.
2) Mail address:
Designate the mail address of the local station's Ethernet module.
3) Check for received mail:
Select whether or not to check for received mail and set the checking time
interval when incoming mail is checked.
When mail check is designated, set the time interval for inquiring the mail
server whether there is mail or not.
The following table shows each setting range of the inquiry time intervals for
checking mail. (30 s to 24 h)
Time units Setting range (default: 5 min)
h 1 to 24
min 1 to 1440
s 30 to 3600