Mitsubishi FUSO FH 1997, Service Manual

Page: 67 / 200

01-14
Inspection of Clutch Pedal Free Play
Service standards
Unit : mm {in.}
Location Maintenance item Standard value Limit Remedy
1
Clutch pedal free play 37 to 52 {1.46 to 2.05} — Adjust
or replace
[Confirmation]
Push clutch pedal 1 with your hand and measure the amount of move-
ment A (free play) until you meet resistance. If the measured value does
not conform to the standard value, adjust by stroke of clutch power
cylinder push rod, or replace the clutch disc.
11064
[Clutch operation]
• Check for unusual noises when clutch pedal 1 is pressed while the
engine is idling, and also for abnormally heavy clutch operation. Also
check to be certain that it is not difficult to shift the vehicle into first and
reverse gears.
• Gradually release clutch pedal 1 to set the vehicle in motion.
Check to be sure there is no slippage, and that the clutch engages
smoothly.
MAINTENANCE OPERATIONS
A: 37 to 52 mm
{1.46 to 2.05 in.}
1
Tire
Ê
Tightening torque
Unit : N·m {lbf.ft, kgf·m}
Location Parts to be tightened Tightening torque Remarks
2
Wheel nut 370 to 410 {275 to 305, 38 to 42} Wet
Service standards
Unit : mm {in.}
Location Maintenance item Standard value Limit Remedy
1
Depth of tire tread grooves — 1.6 {0.063} Replace
-
Lubricant
Location Points of application Specified lubricant Quantity
2
Wheel nut spherical area Chassis grease [NLGI No.1 (Ca soap)] As required
4
Wheel nut (inner) at thread area and spherical area
or
6
Thread area of hub bolt
Wheel bearing grease [NLGI No.1 (Li soap)]