Mitsubishi FUSO FH 1997, Service Manual

Page: 128 / 200

01-31
01
Manual Transmission Gear Oil
Ê
Tightening torque
Unit : N·m {lbf.ft, kgf·m}
Location Parts to be tightened Tightening torque Remarks
1
Inspection plug 69
±
15 {51
±
11, 7
±
1.5} —
2
Drain plug 69
±
15 {51
±
11, 7
±
1.5} —
-
Sealant
Location Points of application Kinds Quantity
1
Thread area of inspection plug THREEBOND 1105D As required
2
Thread area of drain plug THREEBOND 1105D As required
WARNING
–
The engine is hot immediately after the vehicle stopped, so take
care not to burn yourself.
[Inspection and replenishment]
• Remove inspection plug 1 and check whether the oil level is up to the
edge of the entrance.
• If the level is low, add oil through the inspection plug hole until the
level comes up to the edge of the entrance.
02199
02336
[Replacement]
• Drain the oil after removing inspection plug 1 and drain plug 2.
• Remove any metal particles sticking to the magnetic part of drain plug
2 before reinstalling the plug.
• Add oil through the inspection plug hole until the level comes up to the
edge of the entrance.
• Insert inspection plug 1.
2
1