Mitsubishi FR-EPN, Instruction Manual

Page: 35 / 56

- 29 -
A200E Parameters (Parameter 0 = 100)
# Access Attribute Default Value
100 Get/Set Torque Boost 6.0 %
101 Get/Set Max Freq Limit 120.00 Hz
102 Get/Set Min Freq Limit 0.00 Hz
103 Get/Set Base Frequency 60.00 Hz
104 Get/Set Multi High Speed 60.00 Hz
105 Get/Set Multi Middle Speed 30.00 Hz
106 Get/Set Multi Low Speed 10.00 Hz
107 Get/Set Acceleration Time 5.0 Sec
108 Get/Set Deceleration Time 5.0 Sec
109 Get/Set Electronic Thermal O/L Relay 1.30 Amp
110 Get/Set DC Dynamic Brake Operation 3.00 Hz
111 Get/Set DC Dynamic Brake Operation 0.5 Sec
112 Get/Set DC Dynamic Brake Voltage 6.0 %
113 Get/Set Starting Frequency 0.50 Hz
114 Get/Set Applied Load Selection 0
115 Get/Set Jog Frequency 5.00 Hz
116 Get/Set Jog Accel/Decel Time 0.5 Sec
117 Get/Set Ext Thermal Relay Input 0
118 Get/Set High Speed Max Freq Limit 120.00 Hz
119 Get/Set Base Frequency Voltage 999.90 Volt
120 Get/Set acc/decel ref freq 60.00 Hz
121 Get/Set Acc/Decel Time Increment 0
122 Get/Set Stall Prevention Operation 15.00 %
123 Get/Set High Speed Stall Prevent 999.90 %
124 Get/Set Multi-Speed Setting (4th) 99.99 Hz
125 Get/Set Multi-Speed Setting (5th) 99.99 Hz
126 Get/Set Multi-Speed Setting (6th) 99.99 Hz
127 Get/Set Multi-Speed Setting (7th) 99.99 Hz
128 Get/Set Multi-Speed Input Compensation 0
129 Get/Set Acceleration/Deceleration 0
130 Get/Set External Brake Resistor 0
131 Get/Set Frequency Jump 1A 99.99 Hz
132 Get/Set Frequency Jump 1B 99.99 Hz
133 Get/Set Frequency Jump 2A 99.99 Hz
134 Get/Set Frequency Jump 2B 99.99 Hz
135 Get/Set Frequency Jump 3A 99.99 Hz
136 Get/Set Frequency Jump 3B 99.99 Hz
137 Get/Set Speed Display 4
138 Get/Set Automatic Torque Boost 0.00 %
139 Get/Set Torque Boost Starting Cu 0.00 Amp
140 Get/Set Output Terminal Assignment 1234
141 Get/Set Up-to-Frequency Sensitivity 10.0
142 Get/Set Output Freq Detect FWD 6.00 Hz
143 Get/Set Output Freq Detect REV 99.99 Hz
144 Get/Set Alternate Acceleration/D 5.0 Sec