background image

FOREWORD

This service manual is a guide to servicing of Mitsubishi forklift trucks. The instructions are
grouped by systems to serve the convenience of your ready reference.

Long productive life of your forklift trucks depends to a great extent on correct servicing —
servicing consistent with what you will learn from this service manual. Read the respective
sections of this manual carefully and familiarize yourself with all the components you will
work on, before attempting to start a test, repair or rebuild job.

The descriptions, illustrations and specifications contained in this manual are of the trucks
with the serial numbers in effect at the time it was approved for printing. Mitsubishi forklift
truck reserves the right to change specifications or design without notice and without incurring
obligation.

Pub. No. 99759-7C110

Safety Related Signs

The following safety related signs are used in this service
manual to emphasize important and critical instructions:

Indicates a specific potential hazard
that could result in serious bodily
injury or death.

Indicates a specific potential hazard
that may result in bodily injury, or
damage to, or destruction of, the
machine.

Indicates a condition that can cause
damage to, or shorten service life of,
the machine.

NOTE

WARNING

!

CAUTION

!

Summary of Contents for FBC15N













Reviews: