5
Note:
The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.
°C
°C
TIME SUN
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK
DAY
MONITOR/SET
CLOCK
ON/OFF
2
4
9
1
a
Time Setting
TIME SUN
2
3
4
Day of the Week Setting
4. Setting the Day of the Week and Time
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
Function Selection of remote controller:
Set the functions and ranges available to the
remote controller (timer functions, operating
restrictions, etc.)
Set Day/Time:
Set the current day of the week or time.
Standard Control Screens:
View and set the air conditioning system’s
operating status
Timer Monitor:
View the currently set timer (weekly timer,
simple timer, or Auto Off timer)
Timer Setup:
Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
<How to change the screen>
A
: Hold down both the Operation mode button and the Timer On/Off
button for 2 seconds.
B
: Press the Timer Menu button.
C
: Press the Operation mode (Back) button.
D
: Press either of the Set Time buttons (
or
).
3. Screen Configuration
1. Press the
or
Set Time button
a
to show display
2
.
2. Press the Timer On/Off (Set Day) button
9
to set the day.
* Each press advances the day shown at
3
: Sun
→
Mon
→
...
→
Fri
→
Sat.
3. Press the appropriate Set Time button
a
as necessary to set the
time.
* As you hold the button down, the time (at
4
) will increment first in
minute intervals, then in ten-minute intervals, and then in one-hour
intervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button
4
to lock in the values.
°F
°C
TIMER
MON
OFF
WEEKLY
SUN MON TUE WED THU FRI SAT
WEEKLY
°F
°C
°C
TIME SUN
Function Selection of remote controller
Set Day/Time
Standard Control Screens
OFF
ON
Timer Monitor
Timer Setup
A
D
C
B
C
B
Day of the Week
& Time display
5. Operation
°C
°C
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK
DAY
MONITOR/SET
CLOCK
ON/OFF
2
7
2
3
3
8
6
4
5
8
7
1
1
5
6
2
5
6
1
2
6
5
3
3
7
7
5.1. Turning ON/OFF
<To Start Operation>
Press the ON/OFF button
1
.
• The ON lamp
1
and the display area come on.
Note:
When the unit is restarted, initial settings are as follows.
Remote Controller settings
Mode
Last operation mode
Temperature setting
Last set temperature
Fan speed
Last set fan speed
Airflow up/down
Mode
COOL or DRY
Horiz. outlet *
HEAT
Last setting
FAN
Horiz. outlet *
* Last setting might be applied depending on the type of the indoor unit.
<To Stop Operation>
Press the ON/OFF button
1
again.
• The ON lamp
1
and the display area go dark.
Note:
Even if you press the ON/OFF button immediately after shutting down
the operation is progress, the air conditioner will not start for about three
minutes. This is to prevent the internal components from being damaged.
