11
<Checking the Current Auto Off Timer Setting>
1. Be sure that the “Auto Off” is visible on the screen (at
1
).
2. Hold down the Timer Menu button
b
for
3 seconds
, so that “Monitor”
is indicated on the screen (at
4
).
• The timer remaining to shutdown appears at
5
.
3. To close the monitor and return to the standard control screen, press
the Operation mode (Back) button
2
.
<To Turn Off the Auto Off Timer...>
Hold down the Timer On/Off button
9
for
3 seconds
, so that “Timer
Off” appears (at
6
) and the timer value (at
7
) disappears.
Alternatively, turn off the air conditioner itself. The timer value (at
7
)
will disappear from the screen.
<To Turn On the Auto Off Timer...>
Hold down the Timer On/Off button
9
for
3 seconds
. The “Timer
Off” indication disappears (at
6
), and the timer setting comes on the
display (at
7
).
Alternatively, turn on the air conditioner. The timer value will appear at
7
.
AFTER
TIMER
OFF
AUTO OFF
5
1
4
Timer Setting
°C
°C
AUTO OFF
6
7
AUTO OFF
7
°C
°C
AFTER
OFF
AUTO OFF
6
7
A
13
2
6.2. For wireless remote controller
1
Press the
AUTO STOP
or
AUTO START
button (TIMER SET).
• Time can be set while the following symbol is blinking.
OFF timer :
A
is blinking.
ON timer :
A
is blinking.
2
Use the
h
and
min
buttons to set the desired time.
3
Canceling the timer.
To cancel the OFF timer, press the
AUTO STOP
button.
To cancel the ON timer, press the
AUTO START
button.
• It is possible to combine both OFF and ON timers.
• Pressing the ON/OFF button of the remote controller during timer
mode to stop the unit will cancel the timers.
• If the current time has not been set, the timer operation cannot be
used.
7. Other Functions
°C
°C
TIME SUN
FUNCTION
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK
DAY
MONITOR/SET
CLOCK
ON/OFF
4
1
1
Locking function
indicator
7.1. Locking the Remote Controller Buttons
(Operation function limit controller)
If you wish, you can lock the remote controller buttons. You can use
the Function Selection of remote controller to select which type of
locking function to use. (For information about selecting the lock type,
see section 8, item [4]–2 (1)).
Specifically, you can use either of the following two locking functions.
1
Lock All Buttons:
Locks all of the buttons on the remote controller.
2
Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The “Locking function” indicator appears on the screen to indicate that
buttons are currently locked.
°C
°C
FUNCTION
1
°C
°C
FUNCTION
1
°C
°C
1
6. Timer
<How to Lock the Buttons>
1. While holding down the Filter button
4
, press and hold down the
ON/OFF button
1
for 2 seconds. The “Locking function” indicator
appears on the screen (at
1
), indicating that the locking function is
now engaged.
* If locking has been disabled in Function Selection of remote
controller, the screen will display the “Not Available” message when
you press the buttons as described above.
• If you press a locked button, the “Locking function” indicator (at
1
)
will blink on the display.
<How to Unlock the Buttons>
1. While holding down the Filter button
4
, press and hold down the ON/
OFF button
1
for 2 seconds—so that the “Locking function” indicator
disappears from the screen (at
1
).
