- 23 -
2
How to Use Conduit Mounting Plates
Conduit mounting plates (
ø
27,
ø
33,
ø
40) are packaged with the unit. Use an appropriate plate depend-
ing on the diameter of the wire used. Mount the plate as shown below.
3
How to Mount the Attachment Plate
When using either the left or front knock-out holes for both power-supply line and transmission line, screw
on an attachment plate with two screws (see below). Fix the power-supply line with the bottom clamp, and
fix the transmission line with the top clamp.
Front side
Controller
box
Transmission line
Power-Source line
Attachment plate
Use this hole when threading
the wire through the bottom hole
ø
33 mounting plate
ø
40 mounting plate
ø
27 mounting plate
ø
27 mounting plate
ø
33 mounting plate
ø
33 mounting plate
ø
40
knockout hole
Tapping screw
Front Side of
the Panel
Use this hole when threading
the wire through the front hole.
