background image

2

(4) Mountable to control panel with either screws or DIN rail

This module can be mounted onto the control panel with either screws or
DIN rail.

(5) Compact module size

The module size has been reduced to the same one as that of AJ65SBTC4-
16   / AJ65SBTC1-32   type small remote I/O module.

Item

Size mm (inch)

Height

50.0 (1.97)

Width

118.0 (4.65)

Depth

40.0 (1.58)

AJ65SBT-RPS/RPG

1.2 Packaged parts
After unpacking, make sure that those parts listed below are packaged.

Part name

Quantity

AJ65SBT-RPS/RPG module

1

Terminating resistances 110

 1/2W (Brown, Brown, Brown)

1

Terminating resistances 130

 1/2W (Brown, Orange, Brown)

1

1.3 Abbreviated names, generic names and terms

Abbreviated names,

generic names and terms

Description

AJ65SBT-RPS/RPG

Abbreviation of AJ65SBT-RPS/AJ65SBT-RPG type CC-Link system
optical repeater module.

Segment

System between terminating resistances connected to each other
through cross-over cables.The conventional CC-Link system can be
said to be configured with one segment (See Section 2.1.).

Master station

Station to control the data link system. One station is required for each
system.

Local station

Station which has a sequencer CPU and can communicate with the
master station and the other local stations.

Remote I/O station

Remote station processing only information in unit of bit.
(AJ65BTB1-16D, AJ65SBTB1-16D, AJ65SBTB1-8 , etc.)

Remote device station

Remote station processing only information in unit of bit and in unit of
word.(AJ65BT-64AD, AJ65BT-64DAV, AJ65BT-64DAI, etc.)

Remote station

Generic name of remote I/O station and remote device station.
Controlled by the master station.

Intelligent device station

Station allowing transient transmission such as AJ65BT-R2.(Including
local stations)

Repeater

Module for expanding the CC-Link system by connecting the
segments to each other.

Ready master station

Backup station which inherits data link control when the master station
comes off parallel due to error.

Master local module

Generic name of QJ61BT11, AJ61BT11, A1SJ61BT11, AJ61QBT11
and A1SJ61QBT11.

Master module

Generic name of QJ61BT11, AJ61BT11, A1SJ61BT11, AJ61QBT11
and A1SJ61QBT11 when these are used as the master station.

Local module

Generic name of QJ61BT11, AJ61BT11, A1SJ61BT11, AJ61QBT11
and A1SJ61QBT11 when these are used as the local station.

Remote module

Generic name of AJ65BTB1-16D, AJ65SBTB1-16D, AJ65BT-64AD,
AJ65BT-64DAV, AJ65BT-64DAI and A852GOT.

Intelligent device module

Module allowing transient transmission such as AJ65BT-R2.

Summary of Contents for aj65sbt-rpg































Reviews: