17
4.3 Names and settings of parts
The names of parts of the AJ65SBT-RPS/RPG module, indication statuses of
LEDs, and settings of switches are described below.
1)
3) 2)
1
2
4
B RATE
TEST
ON
DA
DG
+24V
24G
DB
SLD
(FG)
4)
5)
6)
OUT
IN
No.
Name
Application
Check for the module condition by observing the state of lighting of the LED.
Application
LED
Name
For hardware test
For normal operation
PW
Goes on: At power-on.
Goes off: At power-off.
TEST
Goes on: Hardware test is under operation.
Goes off: Communication is under operation.
ERR.
Goes on: Hardware is faulty.
Switch set value is
faulty.
Flashes: Switch set value was
changed during
operation.
Goes off: Normal
Goes on: Communication is faulty.
Switch set value is faulty.
Flashes: Switch set value was
changed during
operation.
Goes off: Communication is
normal.
SD1
Flashes: Circuit is normal.
Goes off: Circuit is faulty.
Goes on: Data is being transmitted
to CC-Link side.
Goes off: Data is not transmitted to
CC-Link side.
RD1
Flashes: CC-Link side circuit is
normal.
Goes off: Optical communication
side circuit is faulty.
Goes on: Data is being received
from CC-Link side.
Goes off: Data is not received from
CC-Link side.
SD2
Flashes: Circuit is normal.
Goes off: Circuit is faulty.
Goes on: Data is being transmitted to
optical communication side.
Goes off: Data is not transmitted to
optical communication side.
1)
Power LED
RD2
Flashes: CC-Link side circuit is
normal.
Goes off: Optical communication
side circuit is faulty.
Goes on: Data is being received
from optical
communication side.
Goes off: Data is not received from
optical communication
side.