Mitsubishi A2USCPU(S1), User Manual

Page: 234 / 272

APP - 39
APPENDICES
Table App2.2 Special Register List (Continue)
Number Name Description Details Applicable CPU
*1
D9116
I/O module
verify error
Bit pattern in units of
16 points of verify
error units
• When I/O modules, of which data are different from
those entered at power-on, have been detected, the I/
O unit numbers (in units of 16 points) are entered in bit
pattern. (Preset I/O unit numbers when parameter
setting has been performed.)
• I/O module verify check is executed also to remote I/O
station modules.
(If normal status is restored, clear is not performed.
Therefore, it is required to perform clear by user
program.)
Usable with all
types of CPUs
Only remote
I/O station
information
is valid for
A2C.
*1
D9117
*1
D9118
*1
D9119
*1
D9120
*1
D9121
*1
D9122
*1
D9123
*1
D9116
I/O module
verification
error Bit pattern of
verification error
module
• When an I/O module different from the I/O module data
registered during power-on is detected, this register
indicates the bit pattern of the I/O module number.
—
Dedicated to
A0J2H.
D9124
Annunciator
detection
quantity
Annunciator
detection quantity
• When one of F0 to 255 (F0 to 2047 for AnA and AnU)
is turned on by SET F 1 is added to the contents of
D9124. When RST F or LEDR instruction is
executed, 1 is subtracted from the contents of D9124.
(If the INDICATOR RESET switch is provided to the
CPU, pressing the switch can execute the same
processing.)
• Quantity, which has been turned on by SET F is
stored into D9124 in BIN code. The quantity turned on
with SET F is stored up to "8."
Usable with all
types of CPUs.
D9116
D9117
D9123
15 14 12 11 13 10 9 8 6 5 4 3 2 1 0 7
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0
Indicates I/O module verify error.
0
0
0 0
1
XY
7E0
1
XY
180
1
XY
0
0 0
b15
D9116
b8 b7 b6 b5 b4 b3 b2 b1
0 is fixed.
Indicates the module
for setting switch 0.
Indicates the module
for setting switch 1.
Indicates the module
for setting switch 2.
Indicates the module
for setting switch 3.
Indicates the module for setting
switch 4 or the module for
extension base unit slot 0.
Indicates the module for setting
switch 5 or the module for
extension base unit slot 1.
Indicates the module for setting
switch 6 or the module for
extension base unit slot 2.
Indicates the module for setting switch 7 or
the module for extension base unit slot 3.
b0