Mitsubishi 2015 OUTLANDER SPORT/RVR Page 290 Owner'S Manual Download

Page: 290 / 384

Listen to MP3s

Comfort controls

7-43

N00717200030

This explains how to listen to audio files on a
disc.

Insert the disc.

Insert a disc to automatically start playback.



“Insert/Eject Discs” (P.7-36)

If a disc is already within the product, press
the MEDIA key to switch to CD as the
source.

Press the

key or

key to select the

track.

This enables selection of the next or previous
track.

Hold down the 3

key or the 4

key.

Fast forward/rewind is possible.

Repeat playback, random playback, and scan
playback are possible.

Press the 1RPT key.

Repeat playback of the track currently being
played.

Hold down the 1RPT key.

Repeat playback of the tracks within the
folder currently being played.

Press the 2RDM key.

Play the tracks in the folder in a random
order.

Hold down the 2RDM key.

Play all tracks in folders on the disc in a ran-
dom order.

Listen to MP3s

CAUTION



CD-ROM and CD-R/RW media can only
play back MP3 format audio files.

To Listen to MP3s

NOTE



Depending on the file structure, it may take
some time to read the contents of the disc.

Select the Track (File)

Fast Forward or Rewind

Switch Playback Mode

Repeat Playback (RPT)

NOTE



Pressing again will cancel.



Selecting a file, ejecting, fast forwarding, or
rewinding will cancel.

Folder Repeat Playback

NOTE



Pressing again will cancel.



Even if the file is selected, folder repeat
playback will not be cancelled.

Random Playback (RDM)

NOTE



Pressing again will cancel.

Folder Random Playback

NOTE



Pressing again will cancel.

BK0206700US.book 43 ページ２０１４年３月２５日　火曜日　午後４時４２分

Summary of Contents for 2015 OUTLANDER SPORT/RVR

































































































































































































































































































































































































Search results

Summary of Contents for 2015 OUTLANDER SPORT/RVR

Reviews:

Related manuals for 2015 OUTLANDER SPORT/RVR

Brands by name

Popular brands

Mitsubishi 2015 OUTLANDER SPORT/RVR, Owner'S Manual

Search results

Summary of Contents for 2015 OUTLANDER SPORT/RVR

Reviews:

Related manuals for 2015 OUTLANDER SPORT/RVR

Brands by name

Popular brands