Mitsubishi 2015 OUTLANDER SPORT/RVR, Owner'S Manual

Page: 255 / 384

Manual air conditioning-Type 1 (if so equipped)
7-8 Comfort controls
7
For quick cooling
1. Set the mode selection dial to the “ ”
position.
2. Set the temperature control dial to the
“MAX A/C” position.
3. Set the blower speed to the highest posi-
tion.
N00731300253
Set the mode selection dial to the positions
shown in the illustration and set the air selec-
tion switch (A) to the outside air position.
The air flow will be directed to the leg area
and the upper part of the passenger compart-
ment. Set the desired blower speed.
Warm air flows to the leg area and unheated
or slightly warm air (depending upon the
position of the temperature control dial) flows
to the upper part of the passenger compart-
ment.
N00731401570
Set the mode selection dial (between “ ”
and “ ”) to remove frost or mist from the
windshield and door window.
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
 To cool the leg areas, set the mode selection
dial to the “
” position.
NOTE
 When the temperature control dial is set to
the “MAX A/C” position, the air condition-
ing compressor will run automatically and
the light will come on. The recirculation
position will be selected automatically. In
this case, you cannot turn the air condition-
ing off or select the outside air position.
NOTE
 When the temperature control dial is set to a
position other than “MAX A/C”, the air
selection will automatically change to out-
side air. The air conditioning will revert to
the previous condition in which the “MAX
A/C” position was not selected.
Combination of unheated air and
heated air
NOTE
Defrosting or defogging (wind-
shield, door windows)
CAUTION

For safety, make sure you have a clear view
through all the windows.
 For ordinary defrosting
BK0206700US.book 8 ページ ２０１４年３月２５日 火曜日 午後４時４２分