Mitsubishi MOTORS Pajero, Owner'S Manual

Page: 149 / 377

Super select 4WD II (SS4 II)
E00605700067
Shifting to rear-wheel drive or 4-wheel drive can
be made by operating the transfer shift lever (A).
Shift the transfer shift lever to an appropriate posi-
tion according to the road surface conditions. In ad-
dition, the 2WD/4WD operation indication lamp in-
dicates the transfer shift lever shifting state. Refer
to “2WD/4WD operation indication lamp” on page
4-26.
Vehicles with M/T
Vehicles with A/T
Shift lever position and 2WD/4WD op-
eration indication lamp
E00605800127
Transfer shift lever
position
2WD/4WD
operation in-
dication
lamp
Driving con-
ditions
2H
Rear-wheel
drive
When driv-
ing on dry
paved road.
4H
Full-time 4-
wheel drive
The basic po-
sition for su-
per select
4WD II.
When driv-
ing on dry
paved or slip-
pery roads.
4HLc
Centre dif-
ferential lock
engaged 4-
wheel drive
When driv-
ing on
rough, sand
or snow cov-
ered roads.
: Illuminate
: Remain off
Transfer shift lever
position
2WD/4WD
operation in-
dication
lamp
Driving con-
ditions
4LLc
Low range
centre differ-
ential lock
engaged 4-
wheel drive
When driv-
ing up or
down steep
hills, on
rough or
muddy roads
(especially
when in-
creased tor-
que is re-
quired).
: Illuminate
: Remain off
CAUTION
l The “4LLc” range gives maximum tor-
que for low-speed driving on steep slopes,
as well as sandy, muddy, and other diffi-
cult surfaces. On vehicles with A/T, do
not exceed speeds of approximately
70 km/h (43 mph) in “4LLc” range.
Starting and driving
4-24
4
OBKE12E1