Mitsubishi MOTORS Pajero, Owner'S Manual

Page: 122 / 377

Rear window wiper and washer
E00507300994
The rear window wiper and washer switch can be
operated with the ignition switch in the “ON” or
“ACC” position.
INT- The wiper operates continuously for sev-
eral seconds then operates intermittently
at intervals of about every 8 seconds.
OFF- Off
-
The washer fluid will be sprayed onto
the rear window when the knob is turned
fully in either direction.
The wipers operate automatically several
times while the washer fluid is being
sprayed.
NOTE
l To ensure a clear rearward view, the wiper
performs several continuous operations when
the reverse gear is engaged while the switch
is in the “INT” position.
Following this continuous operation, the wip-
er will automatically switch to intermittent op-
eration.
l It is possible to activate the following func-
tions. For further information, we recom-
mend you to consult a MITSUBISHI
MOTORS Authorized Service Point.
• Adjustment of the interval for intermit-
tent operation
• The wipers can be changed to continuous
operation by turning the knob at the end
of the lever twice to the --- (intermittent
operation) position. (Continuous opera-
tion mode)
• Changing intermittent wiper operation to
continuous wiper operation
Headlamp washer switch*
E00510100231
The headlamp washer can be operated when the ig-
nition switch is in the “ON” or “ACC” position and
the headlamps are on.
Push the button once and the washer fluid will be
sprayed on to the headlamps.
NOTE
l
If the ignition switch is in the “ON” or
“ACC” position and the headlamps are on,
the headlamp washer operates together with
the windscreen washer the first time the wind-
screen washer lever is pulled.
Precautions to observe when using wip-
ers and washers
E00507600027
l If the moving wipers become blocked by ice
or other deposits on the glass, the motor may
burn out even if the wiper switch is turned to
OFF. If obstruction occurs, park your vehicle
in a safe place, turn off the ignition, and
clean the deposits from the glass so that the
wipers operate smoothly.
l
Do not use the wipers when the glass is dry.
They may scratch the glass surface and the
blades wear out prematurely.
Instruments and controls
3-41
3
OBKE12E1