Mitsubishi MOTORS PAJERO OBKE10E1, Owner'S Manual

Page: 238 / 394

To listen to tracks from a device con-
nected via Bluetooth
®
E00762700052
1. Press the PWR button (1) to turn on the au-
dio system. The system turns on in the last
mode used.
2. Press the CD button (3) several times to
switch to the BT-A (Bluetooth
®
) mode. The
input mode changes as follows every time
the CD button is pressed.
CD mode → USB (iPod) mode → Blue-
tooth
®
mode → Rear-seat display mode*
NOTE
l For vehicles equipped with audio/video input
RCA terminals, pressing and holding the CD
button for 2 seconds or more switches the sys-
tem to the AUX mode.
3. Connect your Bluetooth ®
device.
Refer to “Connecting the Bluetooth® 2.0 in-
terface and Bluetooth® device” on page
5-72.
4. Playback starts automatically.
To stop the playback (if supported by the device)
E00762800011
To stop the playback, press the Stop button (10).
To restart the playback, press the Play button (9).
To pause the playback (if supported by the device)
E00762900038
To pause the playback, press the Pause button (10).
To restart the playback, press the Play button (9).
To select a track (if supported by the device)
E00763000036
Press the TRACK button (7) to select the desired
track number.
Press
: The track number increases by
one.
Press
: The track number decreases by
one.
Press for a
long period
(approx. 2 sec-
onds or more)
: The track number increases
continuously while the button
is pressed.
Press for a
long period
(approx. 2 sec-
onds or more)
: The track number decreases
continuouslywhile the button
is pressed.
If the side of the button is pressed once while a
track is
playing, playback returns to the start of that track.
NOTE
l Every time the track selection button is press-
ed, the track number in the display changes.
To play the same track repeatedly (if supported by
the device)
E00763100011
Press the RPT button (4) during playback to show
“RPT” in the display.
To exit this mode, press the button again.
To play tracks in random order (if supported by
the device)
E00763200012
Press the RDM button (5) to show “RDM” in the
display.
The system randomly selects and plays tracks from
all tracks in the Bluetooth
®
device.
To exit this mode, press the button again.
To find the start of each track for playback (if sup-
ported by the device)
E00763300013
Press the SCAN button (8). “SCAN” is shown in
the display and all tracks in the Bluetooth
®
device
are played for approximately 10 seconds from the
beginning.
To exit this mode, press the button again.
To switch the display (if supported by the device)
E00763400014
The system can display tag information.
1. Press and hold the DISP button (2) until you
hear a beep to show “TAG” in the display.
2. The display changes as follows every time
the DISP button (2) is pressed briefly:
Album title → Title name → Artist name →
Genre → Normal display
Example
Album title
Title name
Artist name
NOTE
l Press and hold the DISP button (2) again un-
til you hear a beep, and the tag information
disappears.
For pleasant driving
5-56
5