Mitsubishi MOTORS Colt 2007 Owner'S Manual Download Page 262

Page: 262 / 450

5-46

For pleasant driving

NOTE

●

While listening to a disc on which CD-DA (CD-Digital
Audio) and MP3 files have both been recorded, you can

switch between reading of the CD-DA, reading of the

MP3 files, and AUX (auxiliary input) by pressing the CD
button for 2 seconds or longer (until you hear a beep).

●

With a disc containing both CD-DA and MP3 files, the
CD-DA are automatically played first.

●

The playback sound quality differs depending on the

encoding software and the bit rate. For details, refer to the
user manual of your encoding software.

●

Depending on file/folder configurations on a disc, it may

take some time before playback starts.

●

MP3 encode software and writing software are not sup-

plied with this unit.

●

You may encounter problems playing an MP3 or display-
ing the information of MP3 files recorded with certain

writing software or CD recorders (CD-R/RW drivers).

●

If you record too many folders or files other than MP3
onto a disc, it may take some time before playback starts.

●

This unit does not record MP3 files.

●

For information concerning CD-Rs/RWs, refer to “Notes
on CD-Rs/RWs” on page 5-58.

Folder selection order/MP3 file playback order (Example)

CAUTION

●

Attempting to play a file not in the MP3 format
which has the “.mp3” file name may produce noise

from the speakers and speaker damage, and can

damage your hearing.

Folder selection

In the order

File selection

In the order

Root folder (root directory)

Tree 1

Tree 2

Tree 3

Tree 4

Summary of Contents for Colt 2007



































































































































































































































































































































































































































































Search results

Summary of Contents for Colt 2007

Reviews:

Related manuals for Colt 2007

Brands by name

Popular brands

Mitsubishi MOTORS Colt 2007, Owner'S Manual

Search results

Summary of Contents for Colt 2007

Reviews:

Related manuals for Colt 2007

Brands by name

Popular brands