Mitsubishi MOTORS Colt 2007, Owner'S Manual

Page: 340 / 450

7-6
Vehicle care
7
During cold weather
The salt and other chemicals spread on the roads in some areas
in winter can have a harmful effect on the vehicle body. You
should therefore wash the vehicle as often as possible in
accordance with our care instructions. It is recommended to
have a preservative applied and the underfloor protection
checked before and after the cold weather season.
After washing your vehicle, wipe off all waterdrops from the
rubber parts around the doors to prevent the doors from freez-
ing.
NOTE
●
To prevent freezing of the weatherstripping on the doors,
bonnet, etc., they should be treated with silicone spray.
Waxing
E00901000528
Waxing the vehicle will help prevent the adherence of dust and
road chemicals to the paintwork. Apply a wax solution after
washing the vehicle, or at least once every three months to
assist displacing of water.
Do not wax your vehicle in direct sunlight. You should wax
after the surfaces have cooled.
Polishing
E00901100011
The vehicle should only be polished if the paintwork has
become stained or lost its lustre. Matt-finish parts and plastic
bumpers must not be polished, polishing these parts will stain
them or damage their finish.
Damaged paint
E00901200012
Small cracks and scratches in the paint coat should be touched
up as soon as possible with MITSUBISHI touch-up paint to
prevent corrosion.
Check body areas facing the road or the tyres carefully for
damage to the paint coat caused by flying stones, etc. The paint
code number for your vehicle can be found on the vehicle
information code plate in the engine compartment.
CAUTION
!
●
Waxes containing high abrasive compounds should
not be used. Such waxes remove rust and stain effec-
tively from the paintwork but they are harmful to
the lustre of the painted surface.
Further, they are harmful to glossy surfaces such as
grille, garnish, mouldings, etc.
●
Do not use petrol or paint thinners to remove road
tar or other contamination on the vehicle surface.
●
Do not apply wax on areas with a black mat coating
as it can cause uneven discolouration, patches, blurs,
etc. If stained with wax, wipe off immediately with a
soft cloth and warm water.
CAUTION
!