Mitsubishi MOTORS Colt 2007 Owner'S Manual Download Page 119

Page: 119 / 450

Seat and seat belts

2-71

SRS servicing

E00407900784

NOTE

●

When you transfer ownership of the vehicle to some other
person, we urge you to alert the new owner that it is

equipped with the SRS and refer that owner to the applica-

ble section in this owner’s manual.

●

If you junk or scrap the vehicle, we urge you to first take

the vehicle to a MITSUBISHI MOTORS Authorized
Service Point so that the SRS can be rendered safe.

WARNING

●

We recommend any maintenance performed on or

near the components of the SRS to be performed by
a MITSUBISHI MOTORS Authorized Service

Point.

Improper work on the SRS components or wiring
could result in inadvertent deployment of the air

bags, or could render the SRS inoperative; either

situation could result in serious injury.

●

Do not modify your steering wheel, seat belt retrac-

tor or any other SRS components. For example,
replacement of the steering wheel, or modifications

to the front bumper or body structure can adversely

affect SRS performance and lead to possible injury.

●

If your vehicle has received any damage, we recom-

mend you to have the SRS inspected to ensure it is in

proper working order.

●

On vehicles with the side air bags, do not modify

your front seats, centre pillar and centre console.

It can adversely affect SRS performance and lead to
possible injury.

Also, if you have found any tear or open seam in the

seat fabric at the portion near the side air bag, we
recommend you to have the seat inspected.

●

On vehicles with the curtain air bags, if you have

found any scratch, crack or damage to the portion of
the front and rear pillars and roof side rail, we rec-

ommend you to have the SRS inspected by a

MITSUBISHI MOTORS Authorized Service Point.

Summary of Contents for Colt 2007



































































































































































































































































































































































































































































Search results

Summary of Contents for Colt 2007

Reviews:

Related manuals for Colt 2007

Brands by name

Popular brands

Mitsubishi MOTORS Colt 2007, Owner'S Manual

Search results

Summary of Contents for Colt 2007

Reviews:

Related manuals for Colt 2007

Brands by name

Popular brands