-
-
S
Operation section
1.6 Outline of operation control by microcomputer
1.6.1 Operation control function by remote controller
FAN SPEED button
Each time the button is pressed, the
display is switched over in turn.
OPERATION MODE select button
Each time the button pressed, the
display is switched over in turn.
ON/OFF (luminous) button
Press to start operation, press again to
stop.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down)
direction.
This button changes the air flow (left/right)
direction.
SLEEP button
This button selects SLEEP operation.
CLEAN switch
This switch changes the CLEAN mode.
ON TIMER button
This button selects ON TIMER operation.
AIR FLOW (LEFT/RIGHT) button
3D AUTO button
This button sets 3D AUTO operation.
This button selects ALLERGEN CLEAR
operation.
ALLERGEN CLEAR button
ACL switch
This switch is for resetting microcomputer
and setting time.
OFF TIMER button
This button selects OFF TIMER operation
TEMPERATURE button
These buttons sets the indoor temperature.
(These buttons are used for setting the
current time and timer function as well.)
This button cancels the ON timer, OFF
timer, and SLEEP operation.
CANCEL button
The above illustration shows all controls, but in practice
only the relevant parts are shown.
Unit indication section
Model All models
Illuminates during 3D AUTO operation
TIMER light (yellow)
•
•
ON
OFF
1.5 sec.
0.5 sec.
3 sec.
1 sec.
ON
OFF
Unit ON/OFF button
This button can be used for turning on/off the unit when
remote controller is not available.
Remote controller signal receiver
RUN (HOT KEEP) light (green/blue)
Illuminates during operation.
green : except ECONO operation
blue : ECONO operation
Blinks when airflow stops due to the ‘HOT
KEEP’ and ‘CLEAN operation’.
HOT KEEP
CLEAN operation
Illuminates during TIMER operation.
3D AUTO light (green)
HI POWER light (green)
Illuminates during HIGH POWER operation.
