manualshive.com logo in svg

Mitsubishi Electric WD-60638, Service Manual

Share
Download
Mitsubishi Electric WD-60638 Service Manual Download Page 41

Page 41 

MODELS:  WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-60638CA / WD-65638 / WD-65638CA /  

WD-73638 / WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838 

Data Transfer 

Service Data is duplicated and stored in separate EEPROMs in two locations. 



PWB-MAIN 

- Working Service Data for TV operation 



OPTICAL ENGINE 

- Backup Service Data 

 
The Optical Engine also includes data for the Index Delay setting for color wheel timing determined at the factory. 
The PWB-MAIN also includes User and/or ISF settings. The User/ISF data is not backed up on the Engine. However if 
used, it can be backed up onto a USB flash drive. 
 
Data Transfer Procedures should be followed… 



After PWB-MAIN Replacement:

 

1. 

Restore

 

Engine Data From Backup (Includes Geometry Data in V43C & V43) 

2.  Restore Geometry Data From Backup. (V43+ V43++) 
3.  Restore ISF Settings From Flash Drive. (V43+ V43++) (

Only if backup USB flash drive is available)

. 

 



After OPTICAL ENGINE Replacement:

 

1. 

Restore Index Delay.

 

2. 

Save Engine and Geometry Setting to Backup

 

Data Transfer Procedure: 
V43C & V43  

Data Transfer is accomplished by code command rather than on-screen menus.  

1.  Press <MENU> - Customer Menu will appear 

2. 

Press <2-4-5-7> - No indication will be displayed.

 

3.  Press the four digit Code for the desired date transfer function. The STATUS LED will turn red while the data 

is being transferred. 

4.  Press <EXIT> to quit. 

DATA TRANSFER FUNCTIONS 

<MENU> <2-4-5-7> <CODE>  

TRANSFER FUNCTION 

CODE 

WHEN TO USE 

Restore Engine Data From Backup 

5555 

After PWB-Main Replacement 

Restore Index Delay 

0000 

After Optical Engine Replacement 

Save Engine and Geometry Settings to Backup 

9999 

After Optical Engine Replacement 

Summary of Contents for WD-60638




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands