Page 18
MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-60638CA / WD-65638 / WD-65638CA /
WD-73638 / WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
SCREEN REPLACEMENT 60”, 65” & 73” Models
Screen Assembly Removal and Replacement
1.
V43C, V43
- Open the front control panel door.
2.
V43+, V43++
- Remove the ORNAMENT LEFT & RIGHT first by pinching up and pulling away from the
bottom. Then remove the ORNAMENT CENTER using the same method.
3. Remove screws (A).
4.
V43++
- Disconnect the PWB-SBL connector.
5. Remove screws (B) around the rear edge of the screen bezel.
6.
During re-assembly replace screws in their original locations.
B
B
B
B
B
73 INCH
V43+ (65” 73”)
ORNAMENT LEFT & RIGHT
(Speaker Covers)
ORNAMENT CENTER
V43++
ORNAMENT
CENTER
(Speaker Cover)
ORNAMENT RIGHT
ORNAMENT LEFT
A
A
A
A
(73” Only)
(73” Only)
PWB-SBL
CONNECTOR
A
DOOR
V43C,V43 (60” 65” 73”)
V43+ (60”)
A
A
A
(65” Only)
(65” Only)
Number and Location of
Screws Varies by Model
A
Summary of Contents for WD-60638
Page 2: ......
