manualshive.com logo in svg

Mitsubishi Electric WD-52327, Service Manual, Page: 19 / 51

Share
Download
Mitsubishi Electric WD-52327 Service Manual Download Page 19

MODEL: WD-52327 / WD-62327

Page 19

SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS

Lenticular Screen and Fresnel Lens Installation

Note: 

 Store the Lenticular Screen and Fresnel Lens in a cool dry place.  High humidity may

deform the Lenticular Screen and Fresnel Lens.

1. Apply double coated tape (Part #LENS-TAPE) along the top rear edge of the Lenticular Screen, as shown

below.  Refer to the table below for the tape length.

2. Sandwich the Fresnal Lens and Lenticular Screen together.  The Lenticular Screen label must be towards

the front and the Fresnel Lens label towards the rear. 

 (Figure 4)

3. Apply pressure at the top edge to bond the screens together.
4. Reverse the Screen Removal procedure and insert the screens in the Screen Fame Assembly.

Figure 4:  Installing the Fresnel Lens & Lenticular Screen

*X INCHES - Refer to the Tape Length in the table below

MODEL

SCREEN SIZE

TAPE LENGTH

WD-52327

52 Inches

46.3 Inches

WD-62327

62 Inches

55.1 Inches

Summary of Contents for WD-52327




















































Reviews:

No comments