Mitsubishi Electric VS-50PH50U, Manual

Page: 40 / 120

PH50, XL50, XL21 series Set-up and Installation Manual
40
1.5.1.11. INDICATION
This adjustment is normally unnecessary.
Used to set how to indicate the status information.
1.5.1.11.1. WARNING (for
C
C
h
h
a
a
n
n
g
g
e
e
r
r )
This is to set the indication of a warning mark on screen to induce to replace the spare lamp after
auto-lamp changing or pre-announcement of the changing (“2.1.3.5 Warning indication”, on page
80).
•
OFF: No indication.
•
MESSAGE,
☀
: To display both pre-announcement of auto-lamp changing and a warning
mark to induce to replace the spare lamp.
•
☀
: To display only the warning mark.
[Procedure]
1. Select WARNING in INDICATION in MISC FUNCTION in the system menu.
2. Set OFF, MESSAGE
☀
or
☀
.
1.5.1.11.2. STANDBY
This is to set a blue LED indication on screen (“3.5 LED display”, on page 91) at stand-by state.
•
LED: To light the blue LED on screen.
•
OFF: No indication.
[Procedure]
1. Select STANDBY in INDICATION in MISC FUNCTION in the system menu.
2. Set LED or OFF.
1.5.1.11.3. ERROR
This is to set a blue LED indication on screen (“3.5 LED display”, on page 91) at shutdown due to
errors.
•
LED: To blink the blue LED on screen.
•
OFF: No indication.
[Procedure]
1. Select ERROR in INDICATION in MISC FUNCTION in the system menu.
2. Set LED or OFF.
1.5.1.11.4. BLOWOUT (for X X L L 2 2 1 1 or when the input board is selected in P P H H 5 5 0 0 and X X L L 5 5 0 0 )
This is to set a blue LED indication on screen (“3.5 LED display”, on page 91) at lamp blowout
when BLOWOUT (chapter 1.5.1.13, on page 41) is set OPERATE.
•
LED: To blink the blue LED on screen.
•
OFF: No indication.
[Procedure]
1. Select BLOWOUT in INDICATION in MISC FUNCTION in the system menu.
2. Set LED or OFF.