50
4. TV Menus
Inputs
Name
Cablebox, Cam(corder), CD, DVD
(DVD, DVD2, Blu-ray), DVR, Game
(Game, PS, Xbox, Wii), MP3 Player,
PC, Satellite, VCR, AVR
Delete
(deactivated HDMI only)
On/Off
(
ANT
only)
Lets you assign or
•
change names of inputs appearing in
the
Activity
menu.
Press
-
to move between inputs.
Press
-
to select a name.
You cannot change the name of the current input; you
-
must first switch to another input. If you have only one
input, such as a cable box, make sure the
Ant
input is
On
and switch to
Antenna
in the
Activity
menu before
renaming the single input.
Lets you turn the
•
Ant
input
On
/
Off
(to display/hide it in the
Activ-
ity
menu).
Lets you delete unused HDMI inputs from the
•
Activity
menu.
A CEC-enabled tuner can be named either
•
Cable Box
or
Satellite
.
A CEC-enabled DVD player can be named
•
DVD
,
DVD2
, or
Blu-ray.
General Notes
When you change an input name in the
Name
menu and then exit the
Name
menu:
The name is changed
•
The icon in the
•
Activity
menu is changed
Audio and video settings are changed to the defaults for the new device type.
•
153 and 249 Series:
•
All previous NetCommand IR “learning” for the input is erased.
Notes for HDMI devices
Disconnecting an HDMI device:
•
When you disconnect an HDMI device, the icon remains in the
Activity
menu until
you remove it. Select
Delete
in the
Inputs > Name
menu to remove an unwanted icon for an HDMI input.
If the
•
New Device Found
screen does not display as expected when you connect an HDMI device, see the
reset instructions under “Reactivating Auto Sensing for an HDMI Input,” page 13.
HDMI Control and CEC-Enabled Devices:
•
See Appendix B, “HDMI Control of CEC Devices,” page 75.
If case of CEC conflicts:
•
Turn off CEC signals in one of these ways:
Turn off the TV’s HDMI Control signals to the device (see below for
-
HDMI Control
).
Turn off each device’s internal CEC capability.
-
See Appendix B for the TV’s HDMI Control or, to turn on/off a specific device’s response to CEC signals, see
the device owner’s manual.
Learn
153 and 249 Series
Sets up or changes NetCommand IR control of the current viewing device.
See “About NetCommand IR Control,” page 55.
AVR
153 and 249 Series
Sets up or changes NetCommand IR control of an A/V receiver.
See “NetCommand IR Control of an A/V Receiver” on page 61.
HDMI Control
On, Off
Select
On
or
Off
to enable or disable the TV’s control of a CEC-enabled device.
See Appendix B for use of this feature.
Activity
Lets you
•
customize the
Activity
menu choices for the current input.
Highlight the activity name and press
•
ENTER
to make changes.
See
•
“How is the Activity Menu Generated?” on the opposite page.
