Image adjustment (continued)
EN-35
To adjust the tone of white (COLOR TEMP.):
You can select a preset color temperature (white tone) using the menu.
(See page 25 for menu setting.)
1. Display the IMAGE menu.
2. Select COLOR TEMP. by pressing the
S
or
T
button.
3. Select your desired color temperature by pressing the
W
or
X
button.
To cancel the menu:
4. Press the MENU button.
To adjust the tone of white (To customize the color temperature):
To customize (and store) the color temperature to your preference, carry out the following procedure. (See page 25 for
menu setting.)
1. Select COLOR TEMP. in the IMAGE menu.
2. Press the
W
or
X
button to select USER
.
3. Press the ENTER button.
4. Press the
S
or
T
button to select the desired item.
5. Press the
W
or
X
button to adjust the selected item.
6. Repeat steps 4 and 5 for optimum adjustment results.
To cancel the menu:
7. Press the MENU button.
To enable the stored color temperature:
1. Set COLOR TEMP. to USER
in the IMAGE menu.
About color temperature
There are different variations in white color. Color temperature is a way to show these variations in white. When the
temperature is low, white appears reddish. When the temperature rises, white appears bluish. For example, you can
change the temperature using the following procedures.
To raise the color temperature: Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).
To reduce the color temperature: Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).
• If you set all of CONTRAST R, G, and B to negative values, the original brightness of the image can’t be obtained
even when you maximize CONTRAST in the IMAGE menu.
COLOR ENHANCER
You can set the user-defined balance between the brightness and hue using the menu. (See page 25 for menu
setting.)
1. Display the IMAGE menu.
2. Select COLOR ENHANCER by pressing the
S
or
T
button.
3. Select USER
by pressing the
W
or
X
button.
4. Press the ENTER button.
• The detailed menu for the color enhancer is displayed.
5. Press the
S
or
T
button to select BrilliantColor™ or GAMMA MODE.
6. Press the
W
or
X
button to adjust the selected item.
When USER is selected:
