EN-32
NETWORK menu
ITEM
SETTING
FUNCTION
PROJECTOR NAME *****...
Set the name to identify the projector. Enter up to 15 characters (alphabets
or numeric characters). (See page 39.)
NETWORK
CERTIFICATION
ON
/ OFF
Select whether to enable the network certification or not. Select ON for
normal use. (See page 39.)
NETWORK
PASSWORD
ENTER
Set the password for the certification of PJLink™, ProjectorView
and remote control via LAN. (See page 39.)
IP CONFIG
ENTER
Select this setting for IP Configuration. (See page 40.)
DHCP
ON
Select this setting when you obtain IP CONFIG automatically by DHCP
server.
OFF
Select this setting when you set IP CONFIG manually.
IP ADDRESS
***.***.***.***
Press the ENTER button to set IP ADDRESS. When DHCP is set to ON, you
cannot change this setting
SUBNET MASK
***.***.***.***
Press the ENTER button to set SUBNET MASK. When DHCP is set to ON,
you cannot change this setting.
DEFAULT
GATEWAY
***.***.***.***
Press the ENTER button to set DEFAULT GATEWAY. When DHCP is set to
ON, you cannot change this setting.
MAC ADDRESS
xx-xx-xx-xx-xx-xx
Displays MAC ADDRESS.
SAVE SETTINGS OK
Saves the IP CONFIG settings. When the IP CONFIG is not changed, you
cannot select SAVE SETTINGS.
AMX DEVICE
DISCOVERY
OFF
/
ON
Use this setting when using an AMX controller.
NETWORK RESET
OK
Resets the Network Setting. (See page 42.)
NETWORK
RESTART
OK
Press the ENTER button to restart the network function.
