Mitsubishi Electric PUHZ-W50, Installation Manual

Page: 15 / 29

14
˚
F
˚
C
˚
F
˚
C
ERROR CODE
AFTER
TIMER
TIME SUN MON TUE WED THU FRI SAT
ON
OFF Hr
AFTER
FUNCTION
WEEKLY
ON/OFF TEMP.
Note:
●
“PLEASE WAIT” message
This message is displayed for approximately 3 minutes when power is supplied to the FTC unit or when the unit is recovering from a power fail-
ure.
●
“NOT AVAILABLE” message
This message is displayed if a button is pressed to operate a function that the FTC unit does not have, or a function that is not available due to
the setting.
Display Section
Operation Section
Identifi es the current operation
Shows the operating mode, etc.
* Multi language display is sup-
ported.
“Centrally Controlled” indicator
Indicates that operation of the re-
mote controller has been prohibited
by a master controller.
“Timer is Off” indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the
simple or Auto Off timer is set.
If the simple or Auto Off timer is set,
shows the time remaining.
(Power On indicator)
Indicates that the power is on.
“Locked” indicator
Indicates that remote controller but-
tons have been locked.
Timer indicators
The indicator comes on if the corre-
sponding timer is set.
Opening the
lid
Down
Up
Back
Ahead
Set Temperature buttons
Timer Menu button
(Monitor/Set button)
Mode button (Return button)
Set Time buttons
Timer On/Off button
(Set Day button)
ON/OFF button
Setting change button
Not available
For purposes of this explanation,
all parts of the display are shown.
During actual operation, only the
relevant items will be displayed.
6. Remote controller operation
ON/OFF indicator
Indicates if timer is set ON/OFF.
Error indicator
Comes on when error occurs.
Temperature indicator
Shows the current water tempera-
ture.
6.2 Parts name
■
Wired Remote-Controller
Self check(Clear) button
CIR. WATER button
(<Enter> button)
TEST run function is not
available with this FTC unit.