22
7. Initial setting by remote controller
(1) Press the
button
for 3 seconds to activate the initial setting mode.
(2) [DISPLAY
]
Press
button
to switch to the next parameter setting.
* No.1 or No.2 is indicated in display
.
<Target temperature in heating mode>
Set target flow water temperature in Heating mode with [TEMP] buttons (
and
)
.
<Parameters for Heating ECO mode>
Note:
· Heating ECO mode sets the set temperature depending on the outdoor temperature.
· The parameters except the above 4 parameters cannot be set. (The characteristic is linear between the point A and B.)
· When the “EXTERNAL INPUT(analog signal)” is used, the “HEATING ECO MODE” is invalid.
Set following 4 parameters in HEATING ECO mode with [TEMP] buttons (
and
)
.
HEATING ECO mode= Weather compensation mode
Target flow water temperature varies according to the outdoor temperature.
No.1 Display
shows target flow temperature.
Display
shows outdoor temperature.
No. 2 Display
shows target flow temperature.
Display
shows outdoor temperature.
Press
button
to switch
alternately. (The blinking figure can be changed.)
<Target temperature in HOT WATER mode>
Set target flow water temperature in HOT WATER mode with [TEMP] buttons (
and
)
.
<Target temperature in ANTI-FREEZE mode>
Set target flow water temperature in ANTI-FREEZE mode with [TEMP] buttons (
and
)
.
<Target temperature in COOLING mode>
Set target flow water temperature in COOLING mode with [TEMP] buttons (
and
)
.
˚
C
˚
C
WATER TEMP
HEATING
WATER TEMP
HEATING
WATER TEMP
HEATING ECO
WATER TEMP
HOT WATER
WATER TEMP
ANTI-FREEZE
WATER TEMP
COOLING
WATER TEMP
HEATING ECO
WATER TEMP
HEATING ECO
WATER TEMP
HEATING ECO
WATER TEMP
HOT WATER
WATER TEMP
ANTI-FREEZE
WATER TEMP
COOLING
TEMP OFFSET
HEATING
TEMP OFFSET
COOLING
No.1
No.1
A
No.2
No.2
ON/OFF
TEMP.
MODE
INITIAL SETTING
No. 1*
No. 2*
ON/OFF
FLOW TEMP.
OUTDOOR TEMP.
B
Summary of Contents for PUHZ-W50
Page 28: ...27 ...
