Mitsubishi Electric PUHY-P-YSJM-A Data Book Download Page 65

Page: 65 / 104

(3) Piping direction

Lifting method

¥ When lifting the unit with ropes, run the ropes under the unit and use the lifting hole.

¥ Support the unit at four points with two ropes, and avoid giving mechanical shock.

¥ Suspension rope angle must be 40û or less, so as to avoid compressing fan guard.

¥ Use two ropes, each at least 8m [26 ft.] in length

¥ Use ropes strong enough to support the weight of the unit.

¥ Always suspend the unit from four corners. (It is dangerous to suspend a unit from two corners and must not be

attempted.)

¥ Use protective pads to keep the ropes from scratching the panels on the unit.

¥ Products weighing more than 20 kg [45 LBS] should not be carried alone.

¥ Do not carry the product by the PP bands.

¥ To avoid the risk of injury, do not touch the heat exchanger fins.

¥ Plastic bags may pose a risk of choking hazard to children. Tear plastic bags into pieces before disposing of them.

¥ When lifting and transporting outdoor units with ropes, run the ropes through lifting hole at the unit base. Securely

fix the unit so that the ropes will not slide off, and always lift the unit at four points to prevent the unit from falling.

(Unit : m [ft.])

8 [26]

¥ P250

¥ P350-P400

40û

8 [26]

Summary of Contents for PUHY-P-YSJM-A









































































































Search results

Summary of Contents for PUHY-P-YSJM-A

Reviews:

Related manuals for PUHY-P-YSJM-A

Brands by name

Popular brands

Mitsubishi Electric PUHY-P-YSJM-A, Data Book

Search results

Summary of Contents for PUHY-P-YSJM-A

Reviews:

Related manuals for PUHY-P-YSJM-A

Brands by name

Popular brands