7
GB
3. Operation
<Exiting the Main menu screen>
Press the [RETURN] button to exit
the Main menu and return to the
Main display.
F1
F2
F3
F4
Cool
Room
Auto
Set temp.
Mode
Temp.
Fan
Fri
If no buttons are touched for 10 minutes, the screen will automatically
return to the Main display. Any settings that have not been saved will
be lost.
<Display of unsupported functions>
The message at left will appear if
the user selects a function not sup-
ported by the corresponding indoor
unit model.
F1
F2
F3
F4
Title
Not available
Unsupported function
Return:
3.5.2 Vane·Vent. (Lossnay)
<Accessing the menu>
F1
F2
F3
F4
Main
Main display:
Cursor
Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Select "Vane·Louver·Vent. (Loss-
nay)" from the Main menu (refer to
page 6), and press the [SELECT]
button.
<Vane setting>
F1
F2
F3
F4
Fri
Swing
Off
Off
Louver
Vent.
Vane
Cool
Room
Auto
Set temp.
Mode
Temp.
Fan
Fri
Press the [F1] or [F2] button to go
through the vane setting options:
"Auto", "Step 1", "Step 2", "Step 3",
"Step 4", "Step 5" and "Swing".
Select the desired setting.
Auto
Auto
Swing
Step 1
Step 2
Step 4
Step 3
Swing
Step 5
Select "Swing" to move the vanes
up and down automatically.
When set to "Step 1" through "Step
WKHYDQHZLOOEH¿[HGDWWKHVH
-
lected angle.
under the vane setting icon
This icon will appear when the
vane is set to "Step 5" and the
fan operates at low speed during
cooling or dry operation (depends
on the model).
The icon will go off in an hour, and
the vane setting will automatically
change.
<Vent. setting>
F1
F2
F3
F4
Fri
Low
Vent.
<Returning to the Main menu>
F1
F2
F3
F4
Main
Main display:
Cursor
Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Note:
Ɣ
During swing operation, the directional indication on the screen
does not change in sync with the directional vanes on the unit.
Ɣ
Available directions depend on the type of unit connected.
Ɣ
In the following cases, the actual air direction will differ from the
direction indicated on the remote controller display.
1. While the display is in "STAND BY" or "DEFROST" states.
2. Immediately after starting heat mode (while the system is wait-
ing for the mode change to take effect).
3. In heat mode, when room temperature is higher than the tem-
perature setting.
+RZWRVHWWKH¿[HGXSGRZQDLUGLUHFWLRQ2QO\IRU
wired remote controller) >
Note:
Ɣ
This function cannot be set depending on the outdoor unit to be
connected.
)RU3/)<9%0VHULHVRQO\WKHSDUWLFXODURXWOHWFDQEH¿[HGWRFHUWDLQ
GLUHFWLRQZLWKWKHSURFHGXUHVEHORZ2QFH¿[HGRQO\WKHVHWRXWOHWLV
¿[HGHYHU\WLPHDLUFRQGLWLRQHULVWXUQHGRQ2WKHURXWOHWVIROORZ83
DOWN air direction setting of remote controller.)
Ŷ
Manual vane angle
F1
F2
F3
F4
Main
Main display:
Cursor
Page
Main menu
Maintenance
Initial setting
Service
F1
F2
F3
F4
Maintenance menu
Main menu:
Cursor
Auto descending panel
Manual vane angle
Press the [F3] button to go through
the ventilation setting options in the
order of "Off", "Low", and "High".
* Settable only when LOSSNAY unit
is connected.
Off
Low
High
Off
Low
High
7KHIDQRQVRPHPRGHOVRILQGRRU
units may be interlocked with cer-
tain models of ventilation units.
Press the [RETURN] button to go
back to the Main menu.
1
Select "Maintenance" from the
Main menu (refer to page 6), and
press the [SELECT] button.
2
Select "Manual vane angle" with
the [F1] or [F2] button, and press
the [SELECT] button.
