Mitsubishi Electric PEV-P200YM-A, Operation Manual

Page: 18 / 47

18
7. Other Functions
Button operation
1) Select "Night setback" from the Main menu, and press the
SELECT
button.
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
2) The current settings will appear.
Press the
SELECT
button to go to the setting screen.
F1 F2 F3 F4
Night setback
Setting display:
Night setback Yes
Temp. range 12 - 28
Start 23:00
Stop 5:00
3) Move the cursor to the desired item with the
F1
or
F2
button
out of Night setback No (disable)/Yes (enable), Temp. range,
Start time, or Stop time.
Change the settings with the
F3
or
F4
button.
• Temp. range: The lower limit temperature (for heating operation)
and the upper limit temperature (for cooling operation)
can be set. The temperature difference between the
lower and upper limits must be 4ºC (8ºF) or more.
The settable temperature range varies depending on
the connected indoor units.
• Start/Stop time: settable in 5-minute increments
* Press and hold the button to rapidly advance the numbers.
Press the
SELECT
button to save the settings.
A confirmation screen will appear.
F1 F2 F3 F4
Night setback
Night setback
Select:
Cursor Content
Main menu:
Night setback No / Yes
Temp. range 12 - 28
Start 23:00
Stop 5:00
Night setback No / Yes
Temp. range 12 - 28
Start 23:00
Stop 5:00
Changes saved
F1 F2 F3 F4
Night setback
Night setback
Select:
Cursor Content
Main menu:
Night setback No / Yes
Temp. range 12 - 28
Start 23:00
Stop 5:00
Night setback No / Yes
Temp. range 12 - 28
Start 23:00
Stop 5:00
Changes saved
Navigating through the screens
• To go back to the Main menu ............... MENU button
• To return to the previous screen ...........
RETURN
button
will appear on the Main display in the Full mode when the Night
setback function is enabled.
appears when the timer is disabled by the centralized control system.
Cool
Room
Auto Set temp.
Mode Temp. Fan
Fri
The Night setback will not work in the following cases: when the
unit is in operation, when the Night setback function is disabled, during
an error, during check (in the service menu), during test run, during
remote controller diagnosis, when the clock is not set, during Function
setting, when the system is centrally controlled (On/Off operation,
temperature setting, or Timer operation from local remote controller is
prohibited).
7.7. Filter information
will appear on the Main display in the Full mode when it is time to clean
the filters.
Wash, clean, or replace the filters when this sign appears.
Refer to the indoor unit Instructions Manual for details.
Cool
Room
Auto Set temp.
Mode Temp. Fan
Fri
Button operation
1) Select "Filter information" from the Main menu, and press the
SELECT
button.
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
2) Press the
F4
button to reset filter sign.
Refer to the indoor unit Instructions Manual for how to clean the filter.
F1 F2 F3 F4
Main menu:
Filter information
Reset
Please clean the filter.
Press Reset button after
filter cleaning.