Mitsubishi Electric PEV-P200YM-A, Operation Manual

Page: 15 / 47

15
7. Other Functions
Navigating through the screens
• To go back to the setting change/day of the week
selection screen ................................... SELECT button
• To go back to the Main menu ...............
MENU
button
• To return to the previous screen ...........
RETURN
button
will appear on the Main display in the Full mode during the OU silent
mode.
Cool
Room
Auto Set temp.
Mode Temp. Fan
Fri
7.4. Setting the temperature range restriction
1) Select "Restriction" from the Main menu, and press the
SELECT
button.
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Restriction
Energy saving
Night setback
Filter information
Error information
2) The current settings will appear.
Move the cursor to "Temp. range" with the F1 or F2 button, and
press the
SELECT
button.
F1 F2 F3 F4
Restriction
Setting display:
Page
Temp. range Yes
Cool·Dry
Heat
Auto
-
-
-
3) The screen to set the temperature range will appear.
Move the cursor to the desired item with the
F1
button out of
"Temp. range," "Cool•Dry," "Heat," or "Auto."
F1 F2 F3 F4
Temp. range
Select:
Cursor Cursor
Temp. range No / Yes
Cool·Dry
Heat
Auto
-
-
-
4) Change the settings with the
F3
or
F4
button.
• Temp. range: No (unrestricted) or Yes (restricted)
• Cool•Dry: Upper and lower limit temperature (1ºC increments)
• Heat: Upper and lower limit temperature (1ºC increments)
• Auto: Upper and lower limit temperature (1ºC increments)
Temperature setting ranges
Mode Lower limit Upper limit
Cool • Dry
*1
*3
19 ~ 30ºC
(67 ~ 87ºF)
30 ~ 19ºC
(87 ~ 67ºF)
Heat
*2
*3
17 ~ 28ºC
(63 ~ 83ºF)
28 ~ 17ºC
(83 ~ 63ºF)
Auto
*4
19 ~ 28ºC
(67 ~ 83ºF)
28 ~ 19ºC
(83 ~ 67ºF)
* The settable range varies depending on the connected unit.
*1 Temperature ranges for the Cool, Dry, and Auto (dual set point)
modes can be set.
*2 Temperature ranges for the Heat and Auto (dual set point) modes
can be set.
*3 Temperature ranges for the Heat, Cool, and Dry modes must meet
the conditions below:
• Upper limit for cooling - upper limit for heating ≥ Minimum
temperature difference (varies with indoor unit model)
• Lower limit for cooling - lower limit for heating ≥ Minimum
temperature difference (varies with indoor unit model)
*4 Temperature range for the Auto (single set point) mode can be set.
Press the
SELECT
button to save the settings.
A confirmation screen will appear.
F1 F2 F3 F4
Temp. range
Temp. range
Select:
Cursor Temp.
Main menu:
Temp. range No / Yes
Cool·Dry
Heat
Auto
Temp. range No / Yes
Cool·Dry
Heat
Auto
Changes saved
-
-
-
-
-
-
Navigating through the screens
• To go back to the Main menu ...............
MENU
button
• To return to the previous screen ...........
RETURN
button
will appear on the Main display in the Full mode when the temperature
range is restricted.
Cool
Room
Auto Set temp.
Mode Temp. Fan
Fri