Mitsubishi Electric PEV-P200YM-A, Operation Manual

Page: 10 / 47

10
6. Timer
3) The screen to enable (Yes) and disable (No) the weekly timer will
appear.
To enable the setting, move the cursor to "Yes" with the F3 or F4
button, and press the
SELECT
button.
F1 F2 F3 F4
Weekly timer
Select:
Cursor
Weekly timer No / Yes
4) The weekly timer setting screen will appear and the current
settings will be displayed.
Up to eight operation patterns can be set for each day.
Move the cursor to the desired day of the week with the
F1
or
F2 button, and press the F3 button to select it. (Multiple days
can be selected.)
Press the SELECT button.
F1 F2 F3 F4
Weekly timer
Input display:
day Select Page
Mon Tue Wed Thu Fri Sat Sun
No.
5) Operation pattern setting screen will appear.
Press the
F1
button to move the cursor to the desired pattern
number.
Move the cursor to the time, On/Off, or temperature with the F2
button.
Change the settings with the
F3
or
F4
button.
• Time: settable in 5-minute increments
* Press and hold the button to rapidly advance the numbers.
• On/Off/Auto: Selectable settings depend on the model of connected
indoor unit. (When an Auto pattern is executed, the system will
operate in the Auto (dual set point) mode.)
• Temperature: The settable temperature range
depends on the connected indoor units. (1ºC increments)
When the Auto (dual set point) mode is selected, two preset
temperatures can be set. If an operation pattern with a single preset
temperature setting is executed during the Auto (dual set point) mode,
its setting will be used as the cooling temperature setting in the Cool
mode.
Press the
SELECT
button to save the settings.
A confirmation screen will appear.
F1 F2 F3 F4
6: 3
1 : 2 - 27
Weekly timer
Weekly timer
Select:
Cursor Content
Day selection:
Thu
Thu
No.
Changes saved
On
Auto
Navigating through the screens
• To go back to the setting change/day of the week
selection screen ...................................
SELECT
button
• To go back to the Main menu ...............
MENU
button
• To return to the previous screen ...........
RETURN
button
will appear on the Main display in the Full mode when the weekly timer
setting for the current day exists.
The icon will not appear while the On/Off timer is enabled or the system is
under centralized control (Timer operation from local remote controller is
prohibited).
Cool
Room
Auto Set temp.
Mode Temp. Fan
Fri
6.1.2. ON/OFF Timer
1) Select "Timer" from the Main menu, and press the
SELECT
button.
F1 F2 F3 F4
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
The On/Off timer will not work in the following cases:
when On/Off
timer is disabled, during an error, during check (in the service menu),
during test run, during remote controller diagnosis, when the clock is
not set, during Function setting, when the system is centrally controlled
(when On/Off operation or Timer operation from local remote controller
is prohibited).