42
Exercise caution when removing heavy parts.
2. Remove the external wires, and place the unit
on a level surface
3. Disconnect the thermistor connector (CN44)
from the Indoor controller board.
4. Removing the blocks
(1) Remove the four fixing screws on the two
attachment blocks to remove them.
(2) Remove the three fixing screws on the top
plate.
(3) Separate the unit.
Indoor controller board
Brackets
(one on each side)
Fig. 19
8. Separating the unit
1. Removing the covers
(1) Remove the two fixing screws on the control box
cover to remove it.
(2) Remove the three fixing screws on the lead wire
cover to remove it.
Control box
cover
Lead wire
cover
Fig. 18
HWE17030.qxd 17.11.9 16:28 Page 42
