[
X
Disassembly Procedure ]
- 39 -
HWE20020
GB
5. Heat exchanger
1. Remove the control box cover according to the
procedure in section
1.
2. Remove the maintenance cover according to the
procedure in section
3.
2.
3. Disconnect the thermistor connector according to
the procedure in section
3.
3 (1).
4. Remove the drain pan according to the procedure
in section
4.
5. Removing the maintenance cover
and bottom plate
(1) Remove the fifteen fixing screws on
the cover (L), cover (M), and bottom plate (N)
to remove it.
6. Removing the separator
(1) Remove the four fixing screws on the
separator (P) to remove it.
7. Removing the heat exchanger
(1) Remove the five fixing screws on the
heat exchanger (Q) to remove it.
Exercise caution when removing heavy parts.
Fig. 7
Fig. 8
Fig. 9
Fig. 10
(N)
(P)
(Q)
(L), (M)
HWE20020.book 39 ページ ２０２０年１１月２７日 金曜日 午前１０時４５分
