Mitsubishi Electric PAR-U01MEDU Smart ME Instruction Book Download Page 29

Page: 29 / 80

Navigating through the Menu

Menu list

Menu items

Setting items and details

Reference

page

Date and time

Sets the current date and time.

Selects the date and time format.

Sets the daylight saving time.

Schedule

Schedules the operation ON/OFF times, operation modes, and set

temperatures for a week.

Timer

Sets the ON/OFF timer.

Sets the Auto-OFF timer.

Settings

Display format

Displays the display language being used.

Temperature unit setting (0.5ºC/1ºC/ºF)

Show/Hide room temperature setting

Backlight timeout setting

Sound and

contrast

Sets the volume of the buzzer that sounds when the screen is

touched.

Sets the screen contrast.

Energy saving

Turns off the unit for the energy-save control.

Sets the operation mode to “Setback” for the energy-save control.

Offsets the set temperature for the energy-save control.

Sets the fan speed to “Low” for the energy-save control.

Puts the unit into the Thermo-off state for the energy-save control.

Specifies the days and the time periods when the energy-save

control will be deactivated.

Sets the brightness sensor condition to deactivate the energy-save

control.

LED Indicator

Sets the operation mode display setting.

Sets the room temperature display setting.

Selects the use or non-use of brightness sensor to switch LED

indicator brightness.

Touch panel

calibration

Sets the calibration settings for the touch panel.

Lock

operations

Locks the ON/OFF, Operation mode, Set temperature, Hold, and

Air direction settings.

Sensor

threshold

setting

Sets the detection sensitivity level for the occupancy sensor.

Sets the brightness/darkness detection thresholds for the

brightness sensor.

Set temp.

range limit

Limits the settable temperature ranges for the Cool, Heat, and

Auto modes.

Auto return

Operates the unit at the specified temperature after the specified

period of time.

Screen cleaning

Temporarily makes the touch panel unresponsive to touch to allow

for cleaning.

Summary of Contents for PAR-U01MEDU Smart ME

















































































Search results

Summary of Contents for PAR-U01MEDU Smart ME

Reviews:

Related manuals for PAR-U01MEDU Smart ME

Brands by name

Popular brands

Mitsubishi Electric PAR-U01MEDU Smart ME, Instruction Book

Search results

Summary of Contents for PAR-U01MEDU Smart ME

Reviews:

Related manuals for PAR-U01MEDU Smart ME

Brands by name

Popular brands