Mitsubishi Electric PAR-U01MEDU Smart ME Instruction Book Download Page 41

Page: 41 / 80

Function settings

Timer

▌

ON/OFF timer

ON/OFF timer allows the user to set a timer to turn on or off the indoor unit at the specified
times.

Button operation

Select

[Timer]

from the Menu.

Then, touch

[ON/OFF timer]

in the list.

The ON/OFF timer will not work in the following

cases:

when ON/OFF timer is disabled, during an

error, during test run, when the clock is not set,

when the ON/OFF operation or timer execution is

prohibited from the centralized controller, when the

Hold function is enabled.

To activate the ON/OFF timer, touch the

[Disabled]

button to change it to

[Enabled]

Specify the

[ON]

-time and

[OFF]

-time with the

buttons.

* The time is settable in 5-minute increments.
* Touch and hold or to rapidly advance the

numbers.

To set the ON/OFF timer to repeat daily, set the

[Repeat]

setting to

[Enabled]

Touch

[Done]

to save the settings.

Navigating through the screens

•

To return to the Menu screen:

[Menu]

button

•

To return to the previous screen:

[Back]

button

Summary of Contents for PAR-U01MEDU Smart ME

















































































Search results

Summary of Contents for PAR-U01MEDU Smart ME

Reviews:

Related manuals for PAR-U01MEDU Smart ME

Brands by name

Popular brands

Mitsubishi Electric PAR-U01MEDU Smart ME, Instruction Book

Search results

Summary of Contents for PAR-U01MEDU Smart ME

Reviews:

Related manuals for PAR-U01MEDU Smart ME

Brands by name

Popular brands