36
GB
i) Right base heater wiring (right side of the unit)
ii) Left base heater wiring (left side of the unit)
Right base heater
(wiring on the left side)
Right base heater
(wiring on the right side)
To install the wiring fixing bracket
8
to the compressor cover as shown
in the figure below, fix the wiring on the right side of the right base heater
to the wiring fixing bracket
8
with the supplied cable strap.
Right base heater
(wiring on the right side)
Wiring fixing bracket
8
(Screw down the
compressor cover fixing
screw as well.)
Supplied cable strap
Compressor cover
To install the wiring fixing bracket
9
to the contactor box as shown in
the figure below, fix the wiring on the right and left sides of the right
base heater to the wiring fixing bracket
9
with the supplied cable
strap. Route the wiring behind the contactor box into the cable hole on
the outdoor unit front panel.
Contactor box
Supplied cable strap
Right base heater
(wiring on the right and
left sides)
Wiring fixing bracket
9
(Screw down the
contactor box fixing
screw as well.)
Left base heater
(wiring on the left side)
Left base heater
(wiring on the right side)
Fix the wiring on the right and left sides of the right base heater and the
wiring on the right side of the left base heater (three wires in total) to
the strap on the outdoor unit front panel.
Left base heater
(wiring on the right side)
Fix to the strap on the outdoor
unit front panel.
Cable hole on the
outdoor unit front
panel
As marked in the figure above, use the supplied cable ties (2 pcs.) to fix
the excess wiring on the right and left sides of the left base heater and the
wiring on the right and left sides of the right base heater together.
WT06456X01.book Page 36 Friday, January 20, 2012 3:39 PM
