27
GB
<PAC-BH03EHT-E>
Run the base heater along the groove on the unit base.
●
Install the base heater inside the unit by following the procedures (6)-1 through (6)-3 below.
(6)-1 Unscrew the screws as shown in the figure below.
Caution: To reduce the risk of injury, wear protective gear when installing the base heater.
Heater mounting bracket
3
Left base heater
(left side of the unit)
Heater mounting bracket
1
,
8
Note: The figure shows a simplified view of the unit base without the components on it.
Heater mounting bracket
3
Heater mounting bracket
7
Groove on the base
Heater mounting bracket
2
Heater mounting bracket
6
Right base heater
(right side of the unit)
Heater mounting bracket
4
,
8
Heater mounting bracket
5
,
8
Unscrew the screw (1 pc.) that
is for the base leg installation.
Unscrew the accumulator
fixing screw (1 pc.).
Unscrew the screw (1 pc.) that is for the base and
compressor cover installation.
WT06456X01.book Page 27 Friday, January 20, 2012 3:39 PM
