33
GB
7. Electrical Wiring
<PAC-BH01EHT-E>
Connect the base heater wiring to the Relay Box as shown in the figures below.
Install the Relay Box after connecting the base heater wiring.
i) Wiring on the left side of the Relay Box
ii) Wiring on the right side of the Relay Box
Base heater
(wiring on the right side)
Top view of the unit
Base heater wiring
Relay Box
Relay Box (Bottom side)
Front view of the unit
Base heater
(wiring on the left side)
Base heater
(wiring on the right side)
Base heater
(wiring on the left side)
With the supplied pipe cover, wrap the pipe that branches out from the
pipe between the compressor and accumulator. Fix the pipe cover and the
base heater wiring (right side) with the supplied cable tie.
Use the supplied pipe cover.
Use the supplied cable tie.
Base heater
(wiring on
the right
side)
Take out the base heater wiring (right side) from the cable hole on the
outdoor unit front panel, then fix the wiring to the strap.
Base heater
(wiring on the
right side)
Fix the wiring to the
strap on the outdoor
unit front panel.
Cable hole on the
outdoor unit front
panel
WT06456X01.book Page 33 Friday, January 20, 2012 3:39 PM
