Mitsubishi Electric NZ2GF-ETB, User Manual

Page: 25 / 254

23
CHAPTER 2 PART NAMES
2
2.
1
Powe
r S
u
pply P
a
rt
2.1
Power Supply Part
Respective names of the Ethernet adapter module's power supply part are shown below.
No. Name Part
1) POWER LED
Indicates the operating status of the power supply part.
• On (green): Normally operating.
• Off: No power input, power failure, or hardware failure
2) FG terminal A ground terminal connected to the shield pattern on the printed circuit board (M3.5 screws)
3) LG terminal A terminal grounded to a power filter (M3.5 screws)
4)
Power input
terminal
Terminals for power input. (M3.5 screws)
For the specifications of the power supply to be connected, refer to "Performance specifications of each part."
(
 Page 31, Section 3.2.1 (1))
4)
3)
2)
1)