Mitsubishi Netcom User Manual
Rev 3 02/24/2009
5
6 How do I Install the Netcom?
The Netcom connects to the RS232 connector of the UPS. Please refer to the UPS
owner’s manual for the location.
** For the 9700 and 2033A UPS the special MIT RS232 connector kit must be used for
the connection between the UPS and the Netcom. This connection consists of the 25 pin
to 9 pin cable, a gender adapter and a network patch cable.
The DE9 to RJ45 cable is used to connect the Netcom to the UPS. The RJ45 connector is
inserted into the terminal identified as “UPS”. A network cable must be inserted into the
“Network” receptacle.
The Netcom requires a 120-volt AC power outlet that is UPS protected. If this is not
available an internal DC power supply can be purchased from Mitsubishi for the 9800,
2033G and 9900 series, all other UPS’s must use a external power supply. Please contact
your sales representative for full details.
7 Netcom Web Server
After completing the initial Netcom IP address assignment, software installation,
cable and Ethernet connections, and power connection, the Netcom will be ready to be
accessed.
7.1 Login Page
Figure 3 Login Page
The default password for the Netcom is:
