Mitsubishi Netcom User Manual
Rev 3 02/24/2009
29
4. During the installation you will be asked if redundant management servers will
manage the remote shutdown agent.
If you do not want to have a redundant setup answer ‘n’ at this prompt.
The installation will then ask for the IP address of the Netcom. Either
enter the specific IP address of the Netcom or enter a ‘*’ to allow any
Netcom to connect to it. Enter ‘y’ when asked if the managing server is a
Netcom.
If you do want to have a redundant setup then answer ‘y’ at this prompt.
The installation will then ask for the IP address of the first Netcom. Either
enter the specific IP address of the Netcom or enter a ‘*’ to allow any
Netcom to connect to it. Enter ‘y’ when asked if the managing server is a
Netcom. You will then be asked the same questions about the redundant
Netcom.
8.1.6 Netware
Perform the following steps to install the remote shutdown agent on Netware:
1. Insert CD into the CD-ROM drive of the Netware Client computer.
2. From the Agent\Netware subdirectory of the CD, copy the contents into a
directory on the NetWare server.
3. From the NetWare system console, load the configuration module
(PMCONFIG.NLM) using the default path. For example, if the files were copied
into a folder called Mitsubishi on the SYS: volume, the module would be loaded
as follows: SYS:Mitsubishi/PMCONFIG
4. After accepting the License Agreement, you will be asked if redundant
Management Servers will manage your remote shutdown agent.
If you do not want to have a redundant setup then answer ‘n’ at this
prompt. The installation will then ask for the IP address of the Netcom.
Either enter the specific IP address of the Netcom or enter a ‘*’ to allow
any Netcom to connect to it. Enter ‘y’ when asked if the managing server
is a Netcom.
If you do want to have a redundant setup then answer ‘y’ at this prompt.
The installation will then ask for the IP address of the first Netcom. Either
enter the specific IP address or enter a ‘*’ to allow any Netcom to connect
to it. Enter ‘y’ when asked if the managing server is a Netcom or ‘n’ if not.
You will then be asked the same questions about the second management
server.
8.1.7 Mac OS X
Perform the following steps to install the remote shutdown agent on Mac OS X:
1. Copy the DiamondLinkRAX.X-OSX.tar.gz file to your hard drive. Browse to
its location with the Mac file manager.
2. Click the icon for the DiamondLinkRAX.X-OSX.tar.gz file.
3. A new folder named DiamondLinkRAX.X-OSX will be created in the same
location as the DiamondLinkRAX.X-OSX.tar.gz file.
4. Browse into the new folder.
5. Click on the DiamondLinkRAX.X-OSX.pkg file.
