24
PHOTOS
4. Removing the compressor
(1) Remove the cabinet. (Refer to 1.)
(2) Remove the terminal cover on the compressor.
(3) Remove the electrical assembly. (Refer to 2.)
(4) Remove the soundproof felt.
(5) Recover gas from the refrigerant circuit.
NOTE :
Recover gas from the pipes until the pressure gauge
shows 0 kg/cm
2
(0MPa).
(6) Disconnect the welded part of the discharge pipe
(7) Disconnect the welded part of the suction pipe.
(8) Remove nuts fixing the compressor.
(9) Remove the compressor.
Photo 5
Compressor
Discharge
pipe
Suction
pipe
Compressor nuts
OPERATING PROCEDURE
Terminal
cover
OB403B--1.qxp 07.6.26 10:29 AM Page 24
