23
OPERATING PROCEDURE
PHOTOS
1. Removing the cabinet
(1) Remove the screws of the cabinet.
(2) Hold the bottom of the cabinet on both sides and remove
the cabinet.
(3) Remove the screws of the service panel and remove the
service panel.
(4) Remove the screw of the valve cover and remove the valve
cover. (MU-A15ND-
).
C2
2. Removing the electrical parts
(1) Remove the cabinet. (Refer to 1.)
(2) Remove the following parts.
•Compressor capacitor (C1)
•Outdoor fan capacitor (C2)
•Terminal block (TB)
Photo 1
Photo 3
Photo 2
Screws
of the
cabinet
Screws
of the
cabinet
Screws
of the
service
panel
Compressor capacitor (C1)
9-4.
MU-A15ND
OUTDOOR UNIT
Outdoor fan capacitor (C2)
Terminal block (TB)
Connector
3. Removing the outdoor fan motor
(1) Remove the cabinet. (Refer to 1.)
(2) Disconnect the connector and remove the hooked lead
wire from the fan motor.
(3) Remove the propeller nut and remove the propeller.
(4) Remove the screws fixing the fan motor.
Photo 4
Hook
Propeller
Propeller nut
Set screws of
outdoor fan motor
Screw of the
valve cover
Photo : MU-A15ND -
C2
OB403B--1.qxp 07.6.26 10:29 AM Page 23
